Miami Amtrak Super-Pack 1.7

This pack is a complete rework of the Amtrak P42DC locomotive and passenger cars from the "Miami - West Palm Beach Route Add-On" you can buy here:

https://store.steampowered.com/app/277752/Train_Simulator_Miami__West_Palm_Beach_Route_AddOn/

Version 1.7 Changes:

Tweaked the volume of the horn and prime mover.
Minor texture changes to the passenger cars.

P42DC Locomotive (Phase V):

Anthracite Gray underbody.
Amtrak Red sill stripe.
Platinum Mist body
Amtrak Blue nose, roof, "Travelmark" logo and numbers.

Amtrak Miami Rolling Stock Phase VI Livery:

Stainless Steel Body.
Amtrak Red and white pin stripes.
Amtrak Blue stripe.
Amtrak Red sill stripe.
Black underbody.

GE 7FDL-16 prime mover sound in normal mode (200-1047 RPM) and HEP mode (900-908 RPM).
The sound is directly linked to the RPM. So, for the HEP engines I gave it 1 RPM per throttle notch. That way you can hear the change in sound according to the throttle position. As you give it more power, the rhythm/beat of the engine stays the same as in real life (900 RPM regardless of throttle notch). But the base sound becomes more powerful and the engine sounds “grouchier”. Also, when you have non-HEP and HEP engines combined, the sound from the HEP engines will overpower the much quieter non-HEP engines. That is until the non-HEP engines surpass 900 RPM (notch 7 & 8). Then, they become KING!

HEP Implementation (Same as before):
For simplicity of installation, I made the non-driver engines operate in HEP mode. Since Train Simulator doesn’t implement HEP loads according to the type and length of a consist, I decided to simulate an 800-kW load, which takes 1072 hp from the engine. On HEP mode, the engine runs at a constant 900 RPM, regardless of throttle position. This limits the power output to 3655 hp, without a HEP load. When you add an 800-kW load, it reduces the power available for traction to just 2583 hp.

NOTE: If you try to tinker with the power settings in the engine’s configuration file, please bear in mind that according to the "Train Simulator Developer Documentation" (Available here: http://tscdevdocs.co.uk/reference-manual/blueprint-editor/diesel-simulation-blueprints/diesel-electric-subsystem.html#TOC-Diesel-Electric-Subsystem), engine power values are expressed in kW and tractive effort in kN.

Requirements

Train Simulator: Miami - West Palm Beach Route Add-On on Steam

Soak up the sun in the new Miami - West Palm Beach route for Train Simulator and drive the commuter rail line under cloudless blue skies from Mangonia Park to Miami Airport.The 70 mile (114 km) long route runs parallel to the Southeast Florida coast and has 18 stations along its length.

Installation Instructions

Go to your Rail Works directory
(Typically: C:\Program Files (x86)\Steam\steamapps\common\RailWorks).
Drop the "Assets" folder in the directory (Overwrite the previous version).
Make sure that you set "Ambient Occlusion" to, at least, the "Low" setting (Preferably "Dynamic").